Nickels Parts Cardinal Parts
Buccaneer 18 Parts List
Nickels Boat Works,
Inc
|2426
South Long Lake
Fenton, Michigan 48430
Phone: (810) 750-1855
Fax: (810) 750-0501
Buccaneer 18 Parts List (updated July 2004)
Description |
Costs |
|
Rudder Complete (including pintles gudgeons spacers and tiller) Finished |
$598.71 |
|
Rudder Complete (including pintles gudgeons spacers and tiller) Unfinished |
$448.71 |
|
Rudder Head SS fits 1 1/2 Aluminum Tiller |
$38.50 |
|
Tiller 1 1/2 Aluminum 55" |
$27.50 |
|
Tiller extension (rubber) |
$42.63 |
|
Tiller extension (metal) |
$48.13 |
|
Rudder Aluminum Cheeks, Stainless Steel Head and Pintles |
$195.00 |
|
Rudder Blade Finished |
$325.00 |
|
Rudder Blade Unfinished |
$175.00 |
|
Fiberglass Centerboard Finished |
$445.00 |
|
Fiberglass Centerboard Unfinished |
$295.99 |
|
Centerboard Hangers (top mount) |
$50.00 |
|
Replacement Centerboard Gasket |
$25.00 |
|
Elvstrom Supermax Bailers |
$110.00 |
|
Elvstrom Rectangular Bailer Large or Super Medium (Pre-Nickels Boats) |
$99.50 |
|
Replacement Gasket Elvstrom Supermax Bailers |
$13.00 |
|
Hiking Straps Padded 88" (straps only) |
$98.91 |
|
Inspection Port 5" |
$9.69 |
|
Inspection Port 6" |
$13.80 |
|
Mast Fully Rigged (shrouds with turnbuckles, internal halyards, topping lift, |
$1,025.19 |
|
boomvang and cunningham fittings for Nickels boats, mast head, pivot pin, |
|
|
forestay)estay)estay) |
|
|
Mast extrusion only |
$409.50 |
|
Mast Machined Tube (call with specifics for your boat) |
$499.00 |
|
Mast Fully Rigged (Same as fully rigged mast except no Halyards or Shrouds) |
$700.00 |
|
Stays with Staymaster fittings* (each)/turnbuckle fitting |
$98.50/$80.50 |
|
Forestay* |
$71.50 |
|
Main Halyard wire and rope splice* |
$82.50 |
|
Jib Halyard wire and rope splice* |
$86.90 |
|
Spinnaker Halyard* 60’ non-continuous/80' continuous |
$19.80/$26.40 |
|
Topping Lift* 28’ |
$9.24 |
|
Mast Head* |
$32.95 |
|
Mast Step (new style with pin) |
$45.00 |
|
Boomvang Nickels double ended with deck hardware |
$189.75 |
|
Cunningham Nickels double ended with deck hardware |
$112.40 |
|
Spinnaker Sheets 40' 3/16" red or green - each |
$12.80 |
|
Jib Sheets 32' 5/16" White Soft |
$20.80 |
|
Jib Cars Nickels for 1" track with 3" Ratcheting Blocks -Port/Stb Cars |
$169.27 |
|
Jib Track - End Stop - Each |
$2.09 |
|
Jib Track 22" - Each |
$21.50 |
|
Description Harken Jib Furling H435 |
Cost$224.35 |
|
Harken Upper Jib Furling Unit |
$92.00 |
|
Harken Lower Jib Furling Drum |
$134.15 |
|
Boom Complete 6:1 main sheeting |
$391.00 |
|
Main sheet blocks and cleating for 6:1 sheeting (Boom and Cap Blocks and Cleat) |
$266.00 |
|
Main sheet 32" 5/16" |
$20.80 |
|
Boom Tube |
$121.00 |
|
Boom Front Casting |
$26.40 |
|
Boom Outhaul Casting |
$32.95 |
|
Gooseneck |
$44.00 |
|
Gooseneck Spike |
$26.20 |
|
Spinnaker Pole Nickels |
$158.95 |
|
Rub Rail - Black or White (Full boat 2 pcs) |
$109.00 |
|
Spinnaker Snout |
$195.00 |
|
Sails Call 10% off all manufactures |
|
|
Covers Call 10% off all manufactures |
|
|
Harken Hardware 10% Discount |
|
|
|
|
|
*Shrouds and Halyards cut to fit your boat - CALL (810-750-1855) |
|
Nickels Parts Cardinal Parts
|
Buccaneer 18 Parts List
|
|
This is a partial list of the most frequently needed parts. Please
call us if you need something that is not listed, and we may be able to obtain it.One-on-one tutoring with Harry Sindle available by appointment - $50 per hour. Complete 100 page/50 diagram Buccaneer Rigging and Handling Guide: $28.00 When possible, shipments are made on a C.O.D. basis. Some items such as booms are shipped as freight and require advance payment before shipment. There is a minimum charge of $20.00/ order, not including shipping. |
|
PARTS SUITABLE FOR NEW OR OLD BOATS |
|
| Item | Price |
| Rudder (fabricated aluminum head and fiberglass blade only, assembled) | $345 |
| Tiller, laminated light and dark wood | $89 |
| Tiller extension, with holding clamp | $42 |
| Rudder pin with rings (needed when adapting rudder to boats with gudgeons on transom) | $15 |
| Fabricated aluminum rudder head, only | $180 |
| Fiberglass rudder, blade, only | $175 |
| Set of two transom pintles, welded together | $46 |
| Replacement rudder gudgeons, each, for new style fabricated rudder heads | $18 |
| Fiberglass centerboard | $295 |
| Centerboard hangers, aluminum, per pair | $48 |
| Replacement centerboard gasket, Mylar & dacron | $28 |
| Set of aluminum centerboard gasket trim piece | $32 |
| Elvstrom style rectangular self-bailer | $66 |
| Replacement gasket for Elvstrom Bailer | $12 |
| Hiking strap webbing (20'), black, 2" wide | $26 |
| Clamp, for securing ends of hiking straps, | $5 |
| Anchorage, for attaching hiking straps to boat | $4 |
| Inspection port 4-1/4" diameter, plastic | $9 |
| Inspection port 6" Diameter, plastic, two piece | $14 |
| Mast, extrusion only, with masthead fitting and sail entry groove milled out | $440 |
| Mast, complete with hardware (no wires) | $618 |
| Mast step, new style, with engaging pin | $45 |
| Shroud, each | $38 |
| Stay adjuster, with clevis pins and rings | $7 |
| Main halyard, wire, with shackle and rope tail | $36 |
| Jib halyard, wire, with rope tail (no swivel) | $24 |
| Safety forestay, with mast tang, and adjust | $42 |
| Upper swivel unit, for jib furling | $82 |
| Lower furling unit, for jib, with furling line | $118 |
| Lever, for tensioning jib halyard | $52 |
| Magic box for tensioning jib halyard | $111 |
| Boom, complete except for mainsheet blocks | $229 |
| Fiddle blocks for boom | $36 |
| Boom casting for gooseneck, w/ tack pin (new boom) | $15 |
| Replacement stainless tack pin only | $9 |
| Mainsail, with bag and battens | $620 |
| Jib, sleeve design (for Chrysler boats) | $330 |
| Jib, wire luff design | $340 |
| Window, in main or jib, extra | $35 |
| Battens, plastic, each (specify length needwd) | $8 |
| Spinnaker, specify choice of colors | $545 |
| Spinnaker pole | $130 |
| Other spinnaker gear, (lines, cleats, block) | $130 |
| Boom vang | $135 |
| Hull drain plug assembly | $10 |
| Boat cover, for trailing and/or mooring | $394 |
| Jib sleeve cover | $82 |
| Rigging and handling guide (over 100 pages of rigging instructions, including upgrades on the older boats, safety and maintenance articles, and how to sail and race the boat properly) | $28 |
| Outboard bracket, to fit reverse transom of | $85 |
Replacement Parts for Chrysler Boats |
|
| Item | Price |
| Replacement hatch for after deck on Buccaneer | $172 |
| Replacement lower jib furling spool | $34 |
| Replacement deck grommet for forestay to replace plastic eye (stainless steel) | $10 |
| Rubber cockpit drain plug | $5 |
| Replacement masthead sheave | $7 |
| Replacement centerboard trunk top section | $215 |
| Flanged 90 Degree transition piece for chute lancher (snout), fiberglass, white | $195 |
| Fiberglass centerboard trunk cap, white, doubles as seat for crew | $110 |
Prices are subject to change without notice
| 2008 BNAC Information | |
|
Date: May 22-26, 2008 Venue: Lake Hartwell, SC Lodging: See NOR Directions: See NOR NOR: Click Here Registration: Click Here |
|
|
Current Roster
|
|
| BNAC 2008 Results A Fleet B Fleet |
|
| McAlpine Downey Gibbs Cup | |
|
Rocky Mountain Buccaneer Rodeo and McAlpine Downey Gibbs Cup Lake Heron Chama, New Mexico August 30-31 2008 Website |
|
| Upcoming Events | |
|
Virginia Governor's Cup |
|
|
|
|
Class Sponsors |
|
|
Nickels Boat Works |
|
| Class Fleets | |
|
|
|
|
|
|
